Magnuson Hellcat TVS2650R Supercharger Kit

$6,595.00

-

  • TVS 2650 hybrid-roots supercharger
  • 100% complete bolt-on system
  • No hood modifications required
  • Bazooka-Tube jackshaft system
  • High flow intercooler system
  • Massive 1” (-16AN) intercooler coolant fittings
  • 105mm throttle body inlet
  • Anodized aluminum fuel rails support over 1500HP
  • Compatible with factory fuel injectors
  • Interchangeable rear cog belt/pulleys for up to 27% overdrive
  • Accepts stock electronic bypass valve and stock throttle body
  • High thermal efficiency
  • High helix four-lobe rotors

*** If you choose a port option it will be shipped directly to us, expect an additional roughly 15 business added onto the delivery  for porting & assembly. *** 

*** FOR ALL INTERNATIONAL ORDERS, PLEASE CONTACT US TO DETERMINE YOUR SHIPPING COST. YOU WILL BE BILLED  SEPARATELY ***
    • $
    • 0 $
    • $

    • 0 $
    • $
    • $

    For all custom color choices, visit Prismatic Powders website. When you find the color you like, write it down in the blank field area.

    • $
SKU: 01-26-62-502-BL Categories: , ,

Description

Unleash the true potential of your Hellcat with the Magnuson Vengeance TVS2650Supercharger System!

Launching early 2018, the Vengeance TVS 2650 for the 2015+ Dodge Hellcat 6.2L V8. This OE replacement supercharger system is designed to deliver maximum performance while retaining factory-like drivability and reliability!

Inside of the supercharger manifold, the newest charge air cooler is 10% larger than the OE keeping your Intake Air Temperatures colder than competitors and provides consistent and repeatable performance! We have also retained the OE electronic by-pass valve to ensure the ECU remains in complete control of the desired boost levels.

One of the most impressive aspects of this latest generation Magnuson supercharger system is that it can outflow the competition even though their supercharger displacement is significantly larger. In addition, it requires less horse power to spin the Vengeance TVS 2650 and its discharge temperatures are significantly lower allowing the supercharger to make over 1000 HP with the stock fuel system and 1200-1400+ HP when supported with upgraded fuel system and powertrain modifications!

Hellcat Specifications

  • TVS 2650 hybrid-roots supercharger
  • 100% complete bolt-on system
  • No hood modifications required
  • Bazooka-Tube jackshaft system
  • High flow intercooler system
  • Massive 1” (-16AN) intercooler coolant fittings
  • 105mm throttle body inlet
  • Anodized aluminum fuel rails support over 1500HP
  • Compatible with factory fuel injectors
  • Interchangeable rear cog belt/pulleys for up to 27% overdrive
  • Accepts stock electronic bypass valve and stock throttle body
  • High thermal efficiency
  • High helix four-lobe rotors

Recommended components for 1000+ HP

  • 1000+ cc/min injectors
  • Upgraded fuel pumps/lines
  • 105mm throttle body
  • Magnuson Crank Pulley Pin Kit (part# 31-26-61-102) for 2016 and earlier crankshafts
  • Magnuson 27% overdrive cog pulley set

Magnuson TVS 2650 Specifications

Operating range to over 25,000 RPM

  • 56% higher flow than TVS 2300
  • Equivalent flow to 4.0L screw type superchargers

 

Included Components

  • TVS 2650 Supercharger retaining OE electronic bypass valve
  • High Performance Liquid-to-Air Intercooler
  • Extruded anodized aluminum high flow fuel rails
  • Front and rear fuel crossovers
  • All necessary fittings, lines, belts, and hardware required
  • 105mm throttle body inlet with adapter for stock throttle body

Warranty

  • 3 year/36,000 mile supercharger parts warranty. See warranty page for details.
  • WARRANTY VOID IF PORTED.

Maintenance

  • Sealed supercharger rotor assembly requires no maintenance or oil change

Emissions Status

  • CARB EO# Pending

Tools Required

  • Metric wrench set
  • 1/4in. – 3/8in. and 1/2in. drive metric socket set (Standard and Deep)
  • 3/8in.and 1/2in. drive inch-pound and foot-pound torque wrenches
  • Belt tensioner wrench
  • Phillips and flat-head screwdrivers
  • 1/2in. breaker bar
  • Fuel line quick disconnect tool (included in kit)
  • Drain pan
  • Hose cutters
  • Hose clamp pliers
  • Safety glasses
  • Torque angle meter
  • Plastic hammer
  • Compressed air
  • Blow gun air tool
  • Metric Allen socket set 3/8in. drive
  • Shop vacuum cleaner
  • Blue Loctite 242
  • Right Angle drill for pinning crank pulley (when required)
  • Helpful Tool: Air or electric impact wrench

Install Time

  • 8-10 Hours

Dimensions and Weights

  • Number of Boxes: 2
  • Box 1 Size: 34″x20″x16″
  • Box 1 Weight: 125 lbs
  • Box 2 Size: 26″x15″x12″
  • Box 2 Weight: 12 lbs

Installation Manual
Magnuson 2650 Hellcat Installation Manual PDF